NEW Blizzard Komply DMX

The NEW Blizzard Komply DMX is a 4-channel DMX512 decoder that can control up to 4 different 12V LED ribbon products or any one RGB(W) LED strip. It converts DMX signal to PWM signal, which can be controlled by a DMX512 console with 256-grayscale levels per channel. It can run in stand-alone mode by via the DIP switches or under DMX512 control using XLR or RJ45 DMX512 Input/Output connections.

DMX Control and Standalone Flexibility

Use the Komply DMX as a compact bridge between a DMX512 controller and constant-voltage LED tape applications. For installations that do not require a console, the onboard DIP switches allow you to set the DMX address and operate in standalone with 7 static colors plus an auto mode. It can also be used with a single channel for simple brightness control when you only need dimming.

Key Features for LED Tape Applications

• Easy to mount and configure
• DMX address configurable via dip switches
• 256 level brightness control
• Full color (16.7M colors)
• 7 static colors + auto in standalone
• Can be used with a single channel for brightness control
• Overload protection, overheat protection, auto-reset
• Certifications: CE, Rohs

Connections and Physical Specs

For integration into common DMX workflows, the unit includes one male, and one female 3-pin XLR connector, and supports XLR or RJ45 DMX512 Input/Output connections. Dimensions are 166 x 67 x 41mm, and weight is 0.9 lbs.