NEW ETC Source 4WRD II Retrofit Kit
Description
Please note that these are backordered and currently have a 28 week lead time.
Source 4WRD II (Watt Reduction Device) LED is a replacement for a standard Source Four burner assembly that converts the HPL source to a white-light LED and provides a significant reduction in power consumption. The simple and quick upgrade is nondestructive and takes less than a minute. In most cases it can even be done without breaking the fixture’s focus. Source 4WRD II LED is theatrically dimmable via DMX or line dimmable, with a traditional LED curve, to allow flexibility for your installation. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements.
Features
- LED details: S4WRD II LED
- Max lumens (3200 K / 3200 K Gallery / Daylight Gallery): 11,430 / 9,716 / 10,333
- Lumens per watt (3200 K / 3200 K Gallery / Daylight Gallery): 120 V: 76.2 / 64.8 / 68.9 | 230 V: 65.3 / 55.5 / 59.0
- L70 rating (hours to 70% output): > 45,000 hours
- Colors used: Warm or Cool White
- Color temperature range: 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
- Calibrated array: N/A
- Red shift: No
- Field angle range: Swappable lens tubes between 5 - 90 degrees
- Gate size: 79 mm
- Aperture size: Lens dependent
- Pattern projection: Yes
- Pattern size: A or B (see manual)
- Camera flicker control/Hz range: No, not PWM dimmed
- Input method: DMX Control or Line Dimmed
- Protocols: DMX / RDM via RJ45
- Modes (Footprint): 1 Channel (Intensity) for DMX
- RDM configuration: Yes
- UI type: 7-segment address display, local level control via UI
- Local control: Yes
- Onboard presets: No
- Onboard sequences: No
- Onboard effects: No
- Fixture to fixture control: No
- Voltage range: 114–125 V, 60 Hz (120 V) / 209–252 V, 50 Hz (230 V)
- Input method: Hard-wired, 1 m cord, Edison plug (120 V) / Hard-wired, 1 m cord, bare end (230 V)
- Inrush: 30 A (first half-cycle) at 120 V / 12 A (first half-cycle) at 230 V
- Fixtures per circuit 120 V: 14 (20 A switched circuit, R20 module or similar) / 230 V: 6 fixtures per non-dimmed circuit (ER15AFR module)
- Wattage (Typical/Standby): 150 W / 1.2 W (120 V) / 175 W / 3.7 W (230 V)
- Current draw: 1.26 A at 120 V / 0.75 A at 230 V
- Materials: Die-cast aluminum
- IP rating IP-20, indoor only
- Weight 3.73 lb (1.69 kg) (Retrofit only)
Additional Details
| Ships From: | United States |
| Manufacturer: | ETC |
| Condition: | Brand New |
| Model: | S4WRDT120 / 7067A1112 |
| Item #: | 28377 (4Wall/UsedLighting.com Owned) |
| Tags: | Lekos, Etc source four, Etc source four led |
- (1) Source 4WRD II Retrofit Kit
- (1) 3' three wire power leads with bare ends
Free Shipping on all NEW Items shipped to the Contiguous US, no matter how large your order is!
Ships from: United States
