NEW Rasha Bullet Bar
Description
NEW Rasha Bullet Bar, Black or Silver Housing. Please select which housing color you'll need by clicking "Select Options."
For events, weddings, and corporate productions where details matter, the Rasha Bullet Bar delivers six individually aimed 2700K warm-white beams (CRI 95) to cleanly highlight centerpieces, floral, signage, and architectural accents. Each head uses a Fresnel lens with hands-on focus control, push in for a tight, soft-edged beam for longer throws, or pull out to expand into a smooth, hot-spot-free wash for wider, closer coverage. Six flexible goosenecks let you position each beam independently, so one fixture can cover multiple targets at once.
Precision focus and high-CRI warm white
Six individual Fresnel lenses give you fast, practical beam shaping on site. With a 3 to 15 degree field angle range and a consistent 2,700K color temperature, the Bullet Bar is designed to produce flattering warm white that reads true on camera and to the eye (CRI 95 ±2). Passive cooling with heat sinks keeps operation quiet for intimate rooms and on-camera environments.
Battery-powered, floor-friendly control
The built-in lithium-ion battery runs 7 to 10 hours at full output, with a typical 4-hour recharge, and supports simultaneous charge and use, so the fixture can stay plugged in during long days while remaining ready for wireless placement. Mount it, aim it, and adjust output without climbing: the IR remote supports per-head selection (H1 to H6) and dimming presets (Off, 10%, 25%, 50%, 70%, 100%) from approximately 10 to 20 ft (environment-dependent), plus an IR Off button to black out all heads at once.
DMX and wireless DMX integration
For show control, the Bullet Bar supports wired DMX via 5-pin XLR input and through, as well as 2.4 GHz wireless DMX receive when cables are not practical. Choose 7-channel or 12-channel DMX modes for flexible programming, including independent head dimming, dimmer curves, electronic strobe (1 to 20 Hz), head-selection macros, and built-in menu programs for quick static scenes, fades, strobe, sound modes, and custom presets.
Built for event workflows and fast rigging
A heavy-duty, tool-less quarter-turn omega bracket mounts to truss or pipe for efficient load-ins, and the fixture can also be free-standing on its four rubber feet. Power is handled with a locking IP65 power input and through, with auto-ranging 100 to 240 VAC charging. The anodized aluminum housing (satin black or silver) is rated IP30 and certified ETL, CE, RoHS, and FCC. Install orientation is any, and a dedicated safety cable point is located on the bottom of the base.
Additional Details
| Ships From: | United States |
| Manufacturer: | Rasha |
| Condition: | Brand New |
| Model: | RP-BBAR-BLK, RP-BBAR-SLV |
| Item #: | 62588 |
| Tags: | Leds, Floods, Wash - flood, White |
- Six individually aimed 2700K warm-white heads with CRI 95
- Up to 10 hours at full output on a single charge
- Tool-less quarter-turn omega bracket, mounts to truss or pipe
- IR per-head control lets you select and dim each of the six heads from the floor
- Wired DMX, 2.4 GHz wireless DMX, and IR remote ready
- Cooling System: Passive, Heat Sinks
- Operating Temperature: 32°F To 122°F (0°C To 50°C)
- Power Connections: Locking IP65 Power Input & Through
- Data Connections: 5-Pin XLR Input & Through
- IP Rating: IP30
- Compliance: ETL, CE, RoHS, FCC
- Mounting: Omega Bracket / Free-Standing
- Rigging Points: (1) ¼-turn Omega Bracket
- Safety Cable Points: (1) Located On The Bottom Of The Base
- Install Orientation: Any
- Main Light Source: (6) 10W Warm White LED, 50,000 Hours Life Expectancy
- Color Temperature: 2,700K
- CRI: CRI 95 (±2)
- Field Angle Range: 3 To 15 Degrees
- Focus Control: Push In: Tight Beam, Soft Defined Edge; Pull Out: Soft Wash, No Hot Spot
- Lens Type: Single Fresnel
- Control Options: DMX, Manual, Auto, Sound-Active, IR Remote, Wireless DMX (2.4 GHz)
- DMX Modes: 7 Channel, 12 Channel
- Wireless Protocol: 2.4 GHz Wireless DMX Receive
- IR Distance: 10 To 20 Ft (3 To 6 M), Environment-dependent
- IR Head Control: H1, H2, H3, H4, H5, H6 (individual Head Select)
- IR Dimming Levels: Off, 10%, 25%, 50%, 70%, (Full) 100%
- IR Off Button: Turns Off All Heads Simultaneously
- Housing: Anodized Aluminum
- Gooseneck: Thermal Plastic
- Housing Color: Black, Silver
- Housing Finish: Satin
- Button Interface: 4-Button Menu
- IR Sensor: Top-Facing
- Wireless DMX On/Off Switch: Rocker Switch, Located By Power Connector
- Wireless ID Button: Black Button On Display Panel, Next To Main Menu Buttons
- Base Type: Four Rubber Feet
- Dimming Levels: 0% To 100%
- Zoom: Manual Adjustment, 3° To 15°
- Shutter / Strobe: Electronic, 1 To 20 Hz
- Dimmer Curves: 3
- Independent Head Control: (6) Individual Head Dimmers
- DMX Head Selection Macros: (31) With Variable Head Combinations
- DMX Chase Macros: (3) With Variable Speeds
- DMX Auto Mode: (1) With Speed Control
- DMX Sound Mode: (1) With Sensitivity Control
- Built-In Menu Programs: (8) Static Scenes, (3) Fade Speeds, (1) Strobe Mode, (5) Sound Modes, (5) Custom Presets
- Charger Input Voltage: 100 To 240 VAC, 50/60 Hz (auto-ranging)
- Power Consumption: 120 Watts, 1A @ 120V, 60 Hz
- Internal Battery Cut-Off: Automatic Cut-Off. Fixture Can Remain Plugged In Safely.
- Runtime (Full Output): 7 To 10 Hours
- Charging Time: 4 Hours
- Battery Type: Lithium-Ion
- Power Switch: Rocker Switch
- Simultaneous Charge + Use: Yes
- Fuse: F315AL250V
- IR Remote Battery: CR2025
- Fixture Warranty: 2-Year Limited Warranty
- Battery Warranty: 6-Month Limited Warranty
- Dimensions (L×W×H): 24.76 × 3.50 × 7.80 In (629 × 89 × 198 Mm)
- Weight: 8.8 Lbs (4.0 Kg)
- (1) Bullet Bar, Black or Silver Housing (Please select which housing color you'll need by clicking "Select Options.")
- (1) Locking IP65 Power Cable, Edison Adapter
- (1) 5-Pin DMX Cable
- (1) 2.4 GHz Wireless DMX Antenna
Free Shipping on all NEW Items shipped to the Contiguous US, no matter how large your order is!
Ships from: United States
