NEW ROBE RDM Communicator

The RDM communicator is a tool box for remote setting of Robe and Anolis fixtures via DMX link. Its main purpose is to set fixture options (DMX address, DMX mode, etc) for Anolis non-display fixtures like ArcPad Xtreme, ArcPad 48 Integral but can be used with any Robe or Anolis fixtures which support RDM protocol.

Streamlined fixture setup over DMX (RDM)

Designed for technicians who need fast configuration in the field, the NEW ROBE RDM Communicator lets you manage common fixture settings directly from the DMX line, without accessing a local display. Use it to address fixtures, select DMX modes, adjust pan/tilt parameters, and trigger practical service functions like reset and identification, especially helpful when multiple fixtures are installed in hard-to-reach positions.

Key features for Robe and Anolis RDM fixtures

• Sets user options and reads fixture information for any Robe fixture with RDM protocol support
• Supports working with multiple fixtures on a DMX line
• Graphic touch screen with 4 operational buttons for quick navigation
• Battery operated, no extra PSU needed (only for charging the battery)
• DMX address setting and DMX mode selecting
• Pan/tilt setting and fixture display setting
• Fixture reset and fixture identification
• Readouts: device hours, lamp hours, lamp strikes, software version, device label
• Lamp on/off control
• Rugged aluminium housing for touring and on-site use

Connectivity and physical specifications

• 3-pin/5-pin XLR input
• Dimensions (h x w x d): 53mm x 98mm x 152mm
• Weight: 0.4kg